上海郜盟为您专业解读计量泵CE认证：
1、计量泵欧盟CE认证指令
MD机械指令：2006/42/EC
2、计量泵欧盟CE认证标准：
EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低
EN 60204-1：2018机械安全.机械电气设备.第1部分：一般要求
EN 13617-1:2004+A1:2009 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
加油站.第1部分：计量泵、加油机和远程抽油机的结构和性能的安全要求
3、EN 13617-1:2004+A1:2009 适用范围：
This European Standard applies to metering pumps, dispensers and remote pumping units to be installed at petrol filling stations, designed to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l·min -1 , and intended for use and storage at ambient temperatures between -20 °C and +40 °C. ! Measures in addition to those required by this standard may be required for use and storage at temperature outside this range. The need for and nature of additional requirements should be determined by the manufacturer, if necessary after consulting the client."
This European Standard deals with all significant hazards, hazardous situations and events relevant to metering pumps, dispensers and remote pumping units, when they are used as intended and under the conditions foreseeable by the manufacturer
This European Standard gives health and safety related requirements for the selection, construction and performance of the equipment."
This European Standard does not deal with noise and with hazards related to transportation and installation.
This European Standard does not include any requirements for metering performance.
Vapour recovery efficiency rates are not considered within this European Standard.
This European Standard is not applicable to metering pumps, dispensers and remote pumping units which are manufactured before the date of publication of this document by CEN.
NOTE Liquefied petroleum gas (LPG) is not a liquid fuel in the sense of this European Standard.
本欧洲标准适用于安装在加油站的计量泵、加油机和远程泵送装置，旨在将液体燃料以高达200 l·min-1的流速分配到机动车辆、船只和轻型飞机的油箱以及便携式容器中，并用于在-20°C至+40°C的环境温度下使用和储存！除本标准要求的措施外，在该范围以外的温度下使用和储存可能需要采取其他措施。如有必要，制造商应在咨询客户后确定额外要求的必要性和性质。"
本欧洲标准涉及在制造商可预见的条件下按预期使用计量泵、分配器和远程抽油机时，与计量泵、加油机和远程抽油泵相关的所有重大危险、危险情况和事件
本欧洲标准对设备的选择、结构和性能提出了健康和安全相关要求。"
本欧洲标准不涉及与运输和安装相关的噪音和危险。
本欧洲标准不包括对计量性能的任何要求。
本欧洲标准不考虑蒸汽回收效率。
本欧洲标准不适用于CEN发布本文件之前制造的计量泵、分配器和远程泵送装置。
注：液化石油气（LPG）不是本欧洲标准意义上的液体燃料。
4、计量泵CE认证流程
1 提交CE申请
2 准备测试样机和技术资料
3 样机测试与整改
4 技术资料审核与整改
5 公告机构审核通过后，工厂获得CE证书
6 设备加贴CE标识，顺利在欧盟市场流通
上海郜盟-欧盟公告机构授权-专业CE认证
了解更多：
机械设备CE认证
CE认证是什么认证？
欧盟CE认证
上海郜盟，专业CE认证技术服务公司，致力于中国制造全球化服务！提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务，高效可靠！
未经允许不得转载！
